The Installation Guide of OEM Orange5 V1.34

The Installation Guide of OEM Orange5 V1.34

Orange5 is a professional programming device for memory and microcontrollers.
Many users of OEM Orange5 eeprom programmer failed to install driver and pass hardware test. Here is how to install OEM Orange 5 V1.34 software?

Now follow me step by step below:

1.You should install Orange5 driver.
Note:Disable local and wireless network connection.

a.You need to open Orange5 software CD, then copy copy Orange5 V1.34 folder to your desktop.
b.You should connect Orange5 USB programmer with your computer, next select "install from a list or specific location(Advanced)".

c.You need to browse and save file to C:/Documents and Setting/Administrator/Desktop/orange5v1.34/Driver and click "Next".
d.If the system prompts "Cannot Star this Hardware", you should press "Finish" to continue.

e.You should open My Computer-Manager-Device Manager,and unplug Orange 5 USB cable then replug. You will see the driver is working well.

2.You should run Orange5 Self test.
a.You should open Orange 5 V1.34 folder on desktop and Orange 5 setup.

b.You need to select Options tab-Programmer Options,Press "Test".

c.Orange5 Self test passes and the hardware is OK.

3.You need to read and write EEPROM.
a.You should select ECU configiration EEPROM and Group and Chip. Then press "OK".

b.You need to select read icon(Note:select the correct chip) and read chip date complete.

c.You should save date and click write icon. Then write chip(i.e 93LC66).

d.You need to save date and open date just read. Then click write icon and re-write 93LC66 to chip.

It ends!