Super VAG is a hot mileage programmer tool. Super VAG can be used to do Odometer Correction, read Security Access Code, program the key , reset airbag, TV Activation and diagnose for VW Passat, VW ,VW Bora, VW Polo, VW Golf, Audi A6, Audi A8, Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia cars. Many customers bought it and feedback some faq about Super VAG. I hope it can help you to solve your problems.
Notice: Super VAG K+CAN Plus 2.0 support odometer correction for the car models after 2007 year. It cannot work well with Audi A4 and TT.
Q1: What tools can correct odometer for VAG vehicles (VW Audi Seat Skoda) before 2007 year?
A1: Recommend you use SUPER VAG K+CAN 4.8, Digiprog3 or Digimaster3.
Q2: Can Super VAG K +Can Plus 2.0 works with Diesel VAG vehicles (VW Audi Seat Skoda)?
A2: Have a try on the Diesel car models, but it can’t work with Diesel trucks.
Q3: Can Super VAG K +Can Plus 2.0 program key for VAG vehicles?
A3: Better to only use Super VAG K +Can Plus 2.0 to correct mileage. To make key for VW Audi, advice you use VVDI.
Q4: Super VAG K+CAN V4.6 VS Super VAG K+CAN Plus 2.0
A4:Suggest you only use them to correct mileage, although they also have other features as described. The following parts listed are about their differences.
1) Super VAG K+CAN V4.6 is better for K-line protocol cars, Super VAG K+CAN Plus 2.0 is better for CAN protocol cars.
2) Super VAG K+CAN Plus 2.0 support odometer correction for the car models after 2007 year, Super VAG K+CAN V4.6 for the car models before 2007.
3) Super VAG K+CAN Plus 2.0 supports reading more cars' pin code.
Q5: When can I use Super VAG K + CAN Plus 2.0 "IMMO Switch" Function?
A5: When the IMMO OFF, you can use "IMMO Switch" Function.
A6: There are two reasons:
1) the factory server is under maintenance, please wait for some time.
2) The network connection is unable to connect to the factory server, how to solve? Try the following three steps:
A). Open command windows ( StartMenu-Run-type "cmd"-OK );
B). Type "ipconfig;flushdns" to flush DNS resolver cache;
C). Type "ping xhorse.gicp.net" to check connection to server.
Q7: After use Super VAG 2.0 to complete change mileage, the car can't start.
A7: Please try to the following operation:
1) Please back to the old mileage value with Super VAG 2.0, maybeIt hasn't complete change mileage before you stop it, and then the dashboard freeze and the car can't start.
2) Select the option "Other" in the plus 2.0 menu to reset RB8.
3) Back to the old mileage value with the VAG commander software of VVDI , choose K-LINE dashboard, and set the immobilizer to "6".
Q8: When I use Super VAG K+CAN Plus 2.0 to correct mileage for 2008 VW Touran 1.9 TDI, I got error code (10).
A8: You choose a wrong protocol (as: nec24c32, nec24c64) or your car model is not supported by Super VAG K+CAN Plus 2.0.
Q9: I Super VAG K+CAN plus 2.0 updated 70% / xx% then got "update failed" error.
A9: This may:
1. Connection to server temporary interrupted
2. Device does not response
没有评论:
发表评论