How to Connect BMW ICOM A2 with Wifi?

How to Connect BMW ICOM A2 with Wifi?

BMW ICOM A2+B+C Diagnostic & Programming Tool is with latest software, adapter and WIFI. It is the second generation of BMW ISTA Diagnose and programming system. BMW A2 is a best BMW ICOM. Many customers feedback that they do not know how to connect BMW ICOM A2 with Wifi. Here is the engineer's advice.

1. You should insert D-LINK to your computer.
2. You need to start your computer.
3. You'd better double click "ISPI-NEXT Admin Tools" shortcuts on your desktop, wait about 20 seconds until the software startup.
4. You should select "Wifi For ICOM", wait about 5 seconds until it ticks.
5. At this time, you can check Wifi connection in your phone, you will find Wifi name "ISAP" after D-LINK successfully startup.
6. You must connect "ICOM" to vehicle.
7. After "ICOM SYSTEM" light stop flashing, "WLAN" light will flash for several seconds then keep on, it means "ICOM" is successfully connected to the computer.

a.USB WIFI connection should be done as the following picture.

b.The computer comes with wifi off, or otherwise add wifi can not be opened, the computer can only have our equipment usb wifi, wired Ethernet port can not connect to the network, the device can not connect the network cable

c.After confirming all the tips, then you should turn on the computer.

d.After power on the laptop, you should confirm all net is off, and not connect to internet.

e.You'd better open the "BMW ICOM" software.

f. You need to conenct the cars with "ICOM A2" device, wait 20-60 seconds, then you can see the "WIFI" light on the device flash, or always on. This mean the wifi connect well.

g.You can start work with diagnostic, or programming.

h.This table cannot close, only can make it Minimum.

i.You should check the software can recognize the device.

It ends!