The Usage of WIFI ELM327 Scanner Work with Rev Software APP on Iphone OS

The Usage of  WIFI ELM327 Scanner Work with Rev Software APP on Iphone OS

WIFI ELM327 OBD2 Scanner is able to detect and interpret these protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on).

Here share usage of WIFI ELM327 scan tool to work with Rev Software APP via IOS below.

Tool:

IOS phone or tablet;WIFI ELM327 OBD2 Auto Scanner and ELM327 OBD2 Car Diagnostic Tool;Rev software APP.

Here is the Process:

1.You should download Rev Software program in iTunes app store
https://itunes.apple.com/us/app/rev/id302420711?mt=8
(NOTE: You have to jailbreak your IOS device when buying or downloading some app programs for Bluetooth OBD2 devices)
2.You should connect your WIFI OBD2 scanner with vehicle;
3.You need to choose your ELM327 device in your IOS device in the Settings;
4.You should connect IOS device with WIFI network;
5.You need to set the IP Address to Static. Configure the IP address to 192.168.0.123 and the Subnet Mask to 255.255.255.0;
6.You should go back and exit settings. The scanner will prompt you to configure an IP as a “router”. Select No. Do not set IP as a router, otherwise, the iPhone will join the internet via ELM327 and all data will not come through after connected to vehicle;
7.You need to start the engine and the WIFI ELM327 scan tool will be powered up through vehicle OBD port;
8.You should configure the connection to use a custom TCP connection with IP 192.168.0.10 and TCP Port 35000 in Rev APP;
9.You should enjoy vehicle data information, for example: see more than 5 parameters using landscape, record the data and later export it to CSV, helps maximize driving habits while saving on fuel etc.