How to update Digiprog 3 V4.94 Odometer Master Programmer Entire Kit？

How to update Digiprog 3 V4.94 Odometer Master Programmer Entire Kit？

Digiprog3 is a hot mileage change tool. Many costomers ask me How to update Digiprog 3 V4.94 Mileage Change Tool. Here is the upgrade process below:

1）You should order Digiprog 3 V4.94 upgrade service.
2) You need to open the update service and install it.
3) You should connect the Diguprog 3 device with computer via USB cable.

4) You need to run setup exe.
5) You should select right com port and choose bin file.

6) The system will run an upgrade. The process will take 15 to 20 minutes. Do not power off during the process.

7) After the upgrade complete, the system will pops out a message reading “Process end”.
You should exit the update program and restart the device. The device is ready to use.

NOTE:a.Do not enter standby mode, or display saver mode when updating.
b.Operation Windows System must be Windows XP SP3 32 bit without any anti-virus software and firewall.
c.Make sure there is enough and stable power supply between machine and computer.
d.Do not cut off the power during the Digiprog 3 update process.